BIXOLON SPP-R200 Manuel d'utilisateur télécharger pdf (Page 20)

Rev. 1.08

- 20 -

SPP-R200

3-7 MSR Usage

1) Press the MSR cover to open.

2) Insert the card as shown in the image

and swipe in the direction of the arrow.

(can be done in both directions)

3) When finished using, press the MSR

cover to close it.

NOTE

If the card does not register, first check to see

if it is properly aligned. When swiping the

card, the recommended swiping speed is

100 ~ 1500 mm/sec.

4. Self-Test

Run the self-test when first setting the printer or when encountering a problem, and check

the following.

- Control Circuit, Mechanisms, Print Quality, ROM Version, and Memory Switch Settings

If no issue is found with the printer after running the self-test, examine the other devices or

peripherals and software. This function is independent of such other devices and software.

• Self-Test Instructions

1) Turn the printer power off and close the printer paper cover.

2) Pressing the paper feed button and power button simultaneously turns the printer on.

3) The printout is produced after releasing the two buttons.

4) To add a printout of the ASCII pattern, press the paper feed button once more.

5) After the ASCII pattern is printed out, the self-test is automatically terminated.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

BIXOLON SPP-R200 Manuel d'utilisateur Page 20