User's Manual SRP-350IIOBE Thermal Printer Rev. 1.01 http://www.bixolon.com
Rev. 1.01 - 10 - SRP-350IIOBE 3) Ethernet Communication signal descriptions Pin No. Signal name Assignment(Color) Function 1 TD+ White Orange Transm
Rev. 1.01 - 11 - SRP-350IIOBE 1-3 Connecting the Drawer ※ WARNING Use a drawer that matches the printer specification. Using an improper drawer m
Rev. 1.01 - 12 - SRP-350IIOBE 1-5 Installing or Replacing the Paper Roll ※ NOTE Be sure to use paper rolls that meet the specifications. Do not use
Rev. 1.01 - 13 - SRP-350IIOBE 1-5-5 Be sure to note the correct direction that the paper comes off the roll. 1-5-6 Pull out a small amount of pape
Rev. 1.01 - 14 - SRP-350IIOBE 1-6 Paper Jam If the paper jam occurs, the Buzzer will beep. If the cover-open can be opened, open the Cover-open and
Rev. 1.01 - 15 - SRP-350IIOBE 1-7 Adjustments and Settings The SRP-350IIOBE is set up at the factory to be appropriate for almost all users. It does
Rev. 1.01 - 16 - SRP-350IIOBE 1-9 Connecting the Power Supply ※ CAUTIONS When connecting or disconnecting the power supply from the printer, make s
Rev. 1.01 - 17 - SRP-350IIOBE 2. Self-Test The self-test checks whether the printer has any problems. If the printer does not function properly, c
Rev. 1.01 - 18 - SRP-350IIOBE 3. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer. This c
Rev. 1.01 - 19 - SRP-350IIOBE 4. Specification Printing method Thermal line printing Dot density 180 dpi (7dots/mm) Printing width 72 mm Paper width
Rev. 1.01 - 2 - SRP-350IIOBE Safety Precautions In using the present appliance, please keep the following safety regulations in order to
Rev. 1.01 - 20 - SRP-350IIOBE 5. Appendix 5-1 Cleaning Printer Paper dust inside the printer may lower the print quality. In this case clean the pr
Rev. 1.01 - 3 - SRP-350IIOBE CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use the
Rev. 1.01 - 4 - SRP-350IIOBE Warning - U.S.A 1) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital d
Rev. 1.01 - 5 - SRP-350IIOBE Waste Electrical and Electric Equipment (WEEE) This marking shown on the product or its literature, indicates that is
Rev. 1.01 - 6 - SRP-350IIOBE Introduction The SRP-350IIOBE Roll Printer is designed for use with electronic instruments such as system ECR, POS, b
Rev. 1.01 - 7 - SRP-350IIOBE Table of Contents 1. Setting Up the Printer ...
Rev. 1.01 - 8 - SRP-350IIOBE 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged or missi
Rev. 1.01 - 9 - SRP-350IIOBE 1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel
Commentaires sur ces manuels