BIXOLON SLP-DX220 Manuel d'utilisateur télécharger pdf (Page 26)

Rev. 1.01

- 26 -

SLP-DX220x/DX223x

5-11 Factory Reset

This function is used to reset the printer settings to factory default settings.

5-11-1 How to reset the printer

1) Press the Pause button for two seconds during Print Standby Mode.

2) Both LEDs will change to orange color and the printer will be set to Stand-alone

Configuration Mode.

3) Press the Feed button at the 3rd LED sequence as shown in section 5-2-2 (Status

LED is Green and LED 2 is blinking Red four times) to reset the printer to factory

settings, and Smart Media Detection function will be executed.

5-12 The Peel-Off (Option)

This function is used to automatically separate labels from the liner.

It is used only with label paper.

1) Open the paper cover.

2) Open the label peel-off cover and set the peeler switch to the ON position.

- Check to see that the LED has turned on.

LED

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

BIXOLON SLP-DX220 Manuel d'utilisateur Page 26