BIXOLON SPP-R300 Spécifications télécharger pdf (Page 22)

SPP-R300 Command Manual

Rev. 1.00 BIXOLON

- 22 -

ESC 3

Function: Set line spacing

Code:

ASCII

ESC 3 n

Hex

1B 33 n

Decimal

27 51 n

Range:

0 ≤ n ≤ 255

Default:

Corresponding to the default line spacing defined by ESC 2

Description:

■ This command sets the line spacing using a following rule.

• Line spacing = n x (vertical or horizontal motion units)

Remarks:

■ With standard mode selected, the vertical motion unit is used.

■ In page mode, the horizontal motion unit is applied when printing start poison is defined to the upper right or lower

right of print area using ESC T, otherwise, the vertical motion unit is used.

■ The line spacing is settable independently for each of standard and page modes.

Differences:

■ Vertical or horizontal motion unit and maximum line spacing settable:

Model Vertical unit Horizontal unit Max line spacing

SPP-R300

0.125mm (1/203 inches) 0.125mm (1/203 inches) 31.875mm

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 148 149

Pas de commentaire

BIXOLON SPP-R300 Spécifications Page 22