Bixolon SRP-350plusII Manuel d'utilisateur

User’s Manual SRP-350/352plusIIA&C Thermal Printer Rev. 1.05 http://www.bixolon.com

Rev. 1.05 - 10 - SRP-350/352plusIIA&C 1-2-3 USB2.0 Interface Pin No. Signal Name Assignment (Color) Function Shell Shield Drain Wire Fra

Rev. 1.05 - 11 - SRP-350/352plusIIA&C 1-4 Setting the Dip Switches 1-4-1 Serial Interface (RS-232C) • DIP Switch 1 SW Function ON OFF Default 1

Rev. 1.05 - 12 - SRP-350/352plusIIA&C • Table 1 – Baud rate (bps) Selection Transmission Speed 1-6 1-7 1-8 Default 2400 ON OFF OFF 9600 4800 ON O

Rev. 1.05 - 13 - SRP-350/352plusIIA&C 1-5 Setting the Memory Switches This printer has “Memory Switch” set which is software switches. Memory Sw

Rev. 1.05 - 14 - SRP-350/352plusIIA&C MSW2-8 MSW2-7 MSW2-6 MSW2-5 MSW2-4 MSW2-3 Character Table OFF OFF OFF OFF OFF OFF Page 0 437 (USA,

Rev. 1.05 - 15 - SRP-350/352plusIIA&C MSW4 Switch Function ON OFF 1 Reserved -- Fixed to OFF 2 Reserved -- Fixed to OFF 3 Single byte Font Select

Rev. 1.05 - 16 - SRP-350/352plusIIA&C 1-6 Installing or Replacing the Paper Roll ※ NOTE Be sure to use paper rolls that meet the specifications

Rev. 1.05 - 17 - SRP-350/352plusIIA&C 1-6-5 Be sure to note the correct direction that the paper comes off the roll. 1-6-6 Pull out a small am

Rev. 1.05 - 18 - SRP-350/352plusIIA&C 1-7 Recommended Papers - TF50KS-E (Paper Thickness: 65μm): Nippon Paper Industries Co., Ltd. - PD 160R (

Rev. 1.05 - 19 - SRP-350/352plusIIA&C 1-9 Adjustments and Settings The SRP-350/352plusII is set up at the factory to be appropriate for almost a

Rev. 1.05 - 2 - SRP-350/352plusIIA&C Safety Precautions In using the present appliance, please keep the following safety regulations in

Rev. 1.05 - 20 - SRP-350/352plusIIA&C 1-11 Connecting the computer You need an appropriate interface cable. 1-11-1 Plug the cable connector sec

Rev. 1.05 - 21 - SRP-350/352plusIIA&C 2. Self test The self-test checks whether the printer has any problems. If the printer does not function p

Rev. 1.05 - 22 - SRP-350/352plusIIA&C 3. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the pri

Rev. 1.05 - 23 - SRP-350/352plusIIA&C 4. Specification Item Details Printer Printing Method Thermal Line Printing Dot Density SRP-350plusII: 180

Rev. 1.05 - 24 - SRP-350/352plusIIA&C 5. Appendix 5-1 Cleaning Printer Paper dust inside the printer may lower the print quality. In this case

Rev. 1.05 - 3 - SRP-350/352plusIIA&C CAUTION Violating following instructions can cause slight wound or damage the appliance. Do

Rev. 1.05 - 4 - SRP-350/352plusIIA&C Warning - U.S.A This equipment has been tested and found to comply with the limits for a Class A digital

Rev. 1.05 - 5 - SRP-350/352plusIIA&C Introduction The SRP-350/352plusII Roll Printer are designed for use with electronic instruments such as

Rev. 1.05 - 6 - SRP-350/352plusIIA&C Table of Contents 1. Setting Up the Printer ...

Rev. 1.05 - 7 - SRP-350/352plusIIA&C 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are dama

Rev. 1.05 - 8 - SRP-350/352plusIIA&C 1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the conne

Rev. 1.05 - 9 - SRP-350/352plusIIA&C 1-2-2 Parallel Interface (IEEE1284) Pin No. Source Compatibility Mode Nibble Mode Byte Mode 1 Host nSt