BIXOLON SRP-352plusIII Manuel d'utilisateur télécharger pdf (Page 26)

SRP-350/352plusIII

Rev. 1.00 BIXOLON

- 26 -

ESC 3

Function:

Set line spacing

Code:

ASCII

ESC

Hex

Decimal

Range:

0 ≤ n ≤ 255

Default:

Corresponding to the default line spacing defined by ESC 2

Description:

■ This command sets the line spacing using a following rule.

• Line spacing = n x (vertical or horizontal motion units)

Remarks:

■ With standard mode selected, the vertical motion unit is used.

■ In page mode, the horizontal motion unit is applied when printing start poison is defined to the upper right or lower

right of print area using ESC T, otherwise, the vertical motion unit is used.

■ The line spacing is settable independently for each of standard and page modes.

Differences:

Vertical or horizontal motion unit and maximum line spacing settable:

Model

Vertical unit

Horizontal unit

Max line spacing

SRP-350plusIII

0.0705mm (1/360 inch)

0.141mm (1/180 inch)

17.98mm

SRP-352plusIII

0.0625mm (1/406 inches)

0.125mm (1/203 inches)

15.937mm

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 119 120

Pas de commentaire

BIXOLON SRP-352plusIII Manuel d'utilisateur Page 26